Description
“Handmade in France”
Made by hand (and uniquely so), the Thiers-Issard brand is, in this one opinion, the most hollow ground and flexible razor left in production today. They’ve produced straight razors for nearly 100 years in Thiers, France, with traditional methods confined to this most special of nations, such as lead tempering and the use of a single forging die and multiple hammer/reheat/hammer cycles versus the quicker method employed elsewhere where a progressive series of forging dies are used in sequence with just one heating cycle.
This razor from Thiers-Issard comes from a historic forging. The forging die used for the shaping’s creation is not known, lost to time. This is different than the Chatellerault razor, which uses old pieces of steel forged long ago; so for the ‘Historic Hand Forged’, steel is modern, forging process is old, forging dies are old.
To keep with the historic nature of this particular forging die, this particular piece of steel is forged by hand; it uses the same “C135” carbon steel of Thiers-Issard’s own creation, but with the rest of their lineup they ‘drop forge’ like you’ve probably seen of German creations. The Germans prefer several progressively more formed shapes of the die, and one quick and hard-dropped heat/hammer/quench process, while the French prefer a single forging die, multiples of reheating, and many more forging drops of less force per drop.
The handle is made from decorated boxwood, which is aged for resistance, and all the intricate woodworking’s done in-house by Thiers-Issard themselves. They’re known for their tremendous pinning skills, too. Pick the piece you like best from the images of our actual inventory!
“Shave Ready”?
If you elect for the factory edge (= do nothing, no note needed @ checkout), you’ll receive your razor exactly as its manufacturers intended…pretty simple!
If you elect for The Superior Shave to further hone your razor [plz add “note to vendor” @ checkout], your razor will be delivered to you Guaranteed Shave Ready! The Superior Shave hones via a method best coined (by the old Thiers-Issard director) as “the opposite of tape“, where the hones’ shapes cater to performance and little else; you begin with your coarsest stone that’s shaped as the smallest imaginary wheel, and you progress to finer abrasives shaped like larger wheels, thus honing from the spine toward the actual edge, leaving a *thin*, concave edge first and foremost.
The convex honing methods were used at Thiers-Issard for many years (they’re the ones that told me about it in the first place ~2010), though [as you can see in the video at top] today as the natural stone convex wheels once used are now commercially deceased, they use 5 pairs of ~flat discs to establish a cutting edge which is then ultimately refined with a dual-grit pasted strop. While I’ve tremendous respect for Thiers-Issard’s method and believe many people will love its shave straight out of the box, if you don’t mind more visual queues of honing, for my own face I prefer the concaved edge, and thus that is how I hone your razor when requested. If a commercial wheel fine and slow enough to establish a concaved bevel still existed, I believe they’d probably still use one.
There is no wrong or right choice for factory edge/further honed, but please do not believe all factory edges are never ‘Shave Ready’, that is an absurd yet common belief. Their intention is certainly for you to only need to strop the new razor (after wiping off the factory oil) prior to shaving to receive a terrific shave. Thanks for reading this, and happy shaving!
